The effect of somatic pain and comorbid mental distress on oral health-related quality of life in orthodontic patients.

OBJECTIVES: The purpose of the present study was to evaluate the prevalence of somatic pain in orthodontic patients and determine whether somatic pain contributes to worsening oral health-related quality of life (OHRQoL) through the mediating effect of psychological discomfort. MATERIALS AND METHODS: Scale measurements and analyses were conducted on a cohort of 769 orthodontic outpatients, encompassing Patient Health Questionnaire-15-pain (PHQ-15-P), Hua-Xi Emotional-Distress Index (HEI), Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ), and Oral Health Impact Profile-14 (OHIP-14). RESULTS: Among the respondents, 56.3% (N = 433) reported somatic pain and 20.0% (N = 154) had mental discomfort based on PHQ-15-P and HEI scores. Patients with somatic pain symptoms had significantly higher scores of HEI and OHIP-14 (P < 0.001), and higher PHQ-15-P and HEI scores emerged as statistically significant predictors of lower OHIP-14 scores (P < 0.001). HEI scores which assessed anxiety and depression partially mediated the correlation between PHQ-15-P and OHIP-14 scores, of which anxiety accounted for 52.9% of the overall mediation effect, dominating the indirect effect. CONCLUSION: Orthodontic patients reporting somatic pains were at a significantly higher risk of worsening OHRQoL during treatment, and this adverse effect is partially mediated by anxiety and depression. CLINICAL RELEVANCE: Our findings highlight the necessity for the assessment of general health and mental well-being during orthodontic interventions. To prevent delays in treating general disorders and the potential failure of orthodontic treatments, we encourage increased attentiveness towards patients with somatic symptoms and consideration of the adverse effects of comorbid mental distress.

Drug-free and multifunctional sodium bicarbonate/hyaluronic acid hybrid dressing for synergistic healing of infected wounds.

Skin wounds are susceptible to microbial infections which commonly lead to the delayed wound healing. Rapid clearance of pathogens from the wound is of great significance and importance for efficient healing of the infected wounds. Herein, we report a multifunctional hybrid dressing, which simply combines sodium bicarbonate (NaHCO3) and hyaluronic acid (HA) for the synergistic wound healing. Addition of NaHCO3 allows the hybrid dressing to have the great antibacterial and antioxidant activity, while maintaining the intrinsic skin repair function of HA. As a result, NaHCO3/HA hybrid dressing showed the great antibacterial activity against both Gram-positive (S. aureus) and Gram-negative (E. coli) pathogens, the ability to improve the fibroblasts proliferation and migration, the cell-protection capacity under H2O2-induced oxidative stress, and most importantly, the great healing efficacy for the mice wound infected by S. aureus. We further found that the epidermal regeneration, the collagen deposition and the angiogenesis were enhanced by NaHCO3/HA hybrid dressing. All these effects were NaHCO3 concentration-dependent. Since the NaHCO3/HA hybrid dressing is drug-free, easily fabricated, biocompatible, and efficient for wound healing, it may have great potentials for clinical management of infected wounds.

The effect of enhanced structure in the posterior segment of clear aligners during anterior retraction: a three-dimensional finite element and experimental model analysis.

BACKGROUND: Mesial tipping of posterior teeth occurs frequently during space closure with clear aligners (CAs). In this study, we proposed a new modification of CA by localized thickening of the aligner to form the enhanced structure and investigate its biomechanical effect during anterior retraction. METHODS: Two methods were employed in this study. First, a finite element (FE) model was constructed, which included alveolar bone, the first premolars extracted maxillary dentition, periodontal ligaments (PDL), attachments and aligners. The second method involved an experimental model-a measuring device using multi-axis transducers and vacuum thermoforming aligners. Two groups were formed: (1) The control group used common CAs and (2) the enhanced structure group used partially thickened CAs. RESULTS: FE model revealed that the enhanced structure improved the biomechanics during anterior retraction. Specifically, the second premolar, which had a smaller PDL area, experienced a smaller protraction force and moment, making it less likely to tip mesially. In the same vein, the molars could resist movement due to their larger PDL area even though they were applied larger forces. The resultant force of the posterior tooth was closer to the center of resistance, reducing the tipping moment. The canine was applied a larger retraction force and moment, resulting in sufficient retraction of anterior teeth. The experimental model demonstrated a similar trend in force variation as the FE model. CONCLUSIONS: Enhanced structure allowed force distribution more in accordance with optimal principles of biomechanics during the extraction space closure while permitting less mesial tipping and anchorage loss of posterior teeth and better retraction of anterior teeth. Thus, enhanced structure alleviated the roller coaster effect associated with extraction cases and offered a new possibility for anchorage reinforcement in clear aligner therapy.

Optimal settings for different tooth types in the virtual bracket removal technique.

OBJECTIVES: To determine the optimal settings for reconstructing the buccal surfaces of different tooth types using the virtual bracket removal (VBR) technique. MATERIALS AND METHODS: Ten postbonded digital dentitions (with their original prebonded dentitions) were enrolled. The VBR protocol was carried out under five settings from three commonly used computer-aided design (CAD) systems: OrthoAnalyzer (O); Meshmixer (M); and curvature (G2), tangent (G1), and flat (G0) from Geomagic Studio. The root mean squares (RMSs) between the reconstructed and prebonded dentitions were calculated for each tooth and compared with the clinically acceptable limit (CAL) of 0.10 mm. RESULTS: The overall prevalences of RMSs below the CAL were 66.80%, 70.08%, 62.30%, 94.83%, and 56.15% under O, M, G2, G1, and G0, respectively. For the upper dentition, the mean RMSs were significantly lower than the CAL for all tooth types under G1 and upper incisors and canines under M and G2. For the lower dentition, the mean RMSs were significantly lower than the CAL for all tooth types under G1 and lower incisors and canines under M, G2, and G0 (all P < .05). Additionally, the mean RMSs of all teeth under G1 were significantly lower than those under the other settings (all P < .001). CONCLUSIONS: The optimal settings varied among different tooth types. G1 performed best for most tooth types compared to the other four settings.

Does clinical experience affect the bracket bonding accuracy of guided bonding devices in vitro?

OBJECTIVES: To study whether and how the clinical experience of the operator affects the accuracy of bracket placement using guided bonding devices (GBDs) in vitro. MATERIALS AND METHODS: Five resin models were bonded virtually with brackets, and the corresponding GBDs were generated and three-dimensionally printed. Nine operators, which included three dental students, three orthodontic students, and three orthodontists, bonded the brackets on the resin models using GBDs on a dental mannequin. After being bonded with brackets, the models were scanned, and the actual and designed positions of the brackets were compared. RESULTS: There was no immediate debonding. The orthodontists spent a significantly shorter time (22.36 minutes) in bracket bonding than the dental students (24.62 minutes; P < .05). The brackets tended to deviate to the buccal side in the dental student group. Linear deviations tended to be smallest in the orthodontic student group, but no significant difference was found among operators with different clinical experience (P > .5). All linear and angular deviations in each group were under 0.5 mm and 2°, respectively. CONCLUSIONS: Clinical experience was positively related to the bonding accuracy using GBDs, especially in the buccolingual dimension. Inexperience also led to longer bonding duration. However, bonding accuracy was clinically acceptable in general.

Customized planning of the visible maxillary arch width in harmony with interparopia width and smile width for female facial aesthetics.

BACKGROUND: The visible maxillary arch width (VAW) is an important aesthetic-determining feature. To date, there is no well-established methodology to determine the aesthetically optimal VAW in customized treatment planning. METHODS: In this study, the common traits of the dentofacial configuration were investigated in most attractive Asian and Caucasian female smiles. The smiling photo of a subject was digitally modified based on combined variations of VAW, smile width (SW), transverse facial dimensions (TFD), and vertical facial dimensions. These modified photos were assessed for aesthetics. The aesthetically essential parameters were identified, and their mathematic correlations and reference ranges were determined for different vertical facial patterns. Using the obtained results, a mathematic guidance was constructed for customized smile designing. The applicability of this guidance was tested in Asian females. RESULTS: The most attractive Asian and Caucasian female smiles have intraracial and interracial commonalities in the VAW-to-TFD ratios. The interparopia width (IPD) predominated over facial widths in determining well-matched VAW and SW. For optimal smile aesthetics, the VAW and SW were correlated as simulated by the formula 1.92 IPD ≤ VAW + 2.3 SW ≤ 2.17 IPD, plus the VAW-to-IPD ratio within 0.54 to 0.62 and the SW-to-IPD ratio within 0.61 to 0.71, ranges tailored to vertical facial patterns. This constitutes a mathematic guidance for customized planning of the aesthetically optimal VAW. This guidance was preliminarily validated to be applicable to Asian females. CONCLUSIONS: The VAW-to-TFD ratios were essential for Caucasian and Asian female smile aesthetics. The mathematic guidance could serve as a reference for customized smile designs for Asian females.

3D-printed coloured tooth model for inlay preparation in pre-clinical dental education.

INTRODUCTION: Accurate inlay preparation is extremely important in pre-clinical training. However, there is a lack of tools to guide students to efficiently practise inlay preparation. Therefore, a 3D-printed coloured tooth model for inlay preparation was designed to guide beginners to practise inlay preparation by themselves according to different colour prompts. This study aimed to evaluate the benefits of using a 3D-printed coloured tooth model in the pre-clinical training on inlay preparation. MATERIALS AND METHODS: Twenty-eight students in their fourth-year undergraduate dental program participated in this study. The participants were randomly assigned to two groups for the inlay preparation. Group 1 prepared a plain tooth model for the first and fourth attempts and a 3D-printed coloured tooth model for the second and third attempts (n = 14). Group 2 prepared four plain tooth models (n = 14). The first and fourth tooth models prepared by both groups were scored using an evaluation system (Fair Grade 2000, NISSIN). Next, questionnaires answered by students were used to evaluate the benefits of using a 3D-printed coloured tooth model and self-evaluate hands-on ability using a grading system (1 = strongly agree, 2 = agree, 3 = neutral, 4 = disagree, and 5 = strongly disagree). The scores were evaluated statistically using the Mann-Whitney U test, and the given grades are displayed as percentages and mean values. RESULTS: There was an overall increase in the clinical confidence of all students after repeated attempts to prepare an inlay; however, students from group 1, who had used the 3D-printed coloured tooth model, had more positive experiences and comments. The 3D-printed coloured tooth model for inlay preparation has been widely praised by participants. Comparing the average score of the first and fourth preparations, the average score of group 1 increased by 12% (Ø 54.46 ± 8.33, Ø 61.11 ± 7.13, p = .090), while that of group 2 increased by 0.72% (Ø 56.39 ± 9.59, Ø 56.80 ± 8.46, p = .925). CONCLUSION: Students favoured the use of the 3D-printed coloured tooth model, and this improved the average score for inlay preparation. The 3D-printed coloured tooth model for inlay preparation is expected to play an important role in dental education in the future.

Pt-Clusters-Equipped Antioxidase-Like Biocatalysts as Efficient ROS Scavengers for Treating Periodontitis.

Developing high-efficiency artificial biocatalysts for scavenging reactive oxygen species (ROS) is critical for treating inflammation diseases and promoting tissue regeneration. By mimicking the active sites in catalase, here, a Pt-clusters-equipped antioxidase-like biocatalysts (Pt─CN) with superior catalytic abilities for stem cell protection and periodontitis treatment are reported. Owing to the excellent effects of multiple Pt clusters, Pt─CN yields exceptional catalytic ROS-scavenging activities for multiple types of ROS. In vitro studies show that Pt─CN can effectively protect stem cell survival, adhesion, and differentiation in a high ROS levels microenvironment. Additionally, Pt─CN can reduce the M1/M2 ratio of macrophages when stimulated by lipopolysaccharide. In vivo treatment of mouse periodontitis further confirms the protection against bone loss and reduction in the inflammatory response. This study provides a basis for the application of biocatalysts with Pt catalytic center in macrophage polarization, stem cell protection, and periodontitis treatment, thus offering a new strategy for the design of high-performance artificial biocatalysts.

Cationic Biopolymeric Scaffold of Chelating Nanohydroxyapatite Self-Regulates Intraoral Microenvironment for Periodontal Bone Regeneration.

Periodontal bone defect is a common but longstanding healthcare issue since traditional bone grafts have limited functionalities in regulating complex intraoral microenvironments. Here, a porous cationic biopolymeric scaffold (CSC-g-nHAp) with microenvironment self-regulating ability was synthesized by chitosan-catechol chelating the Ca2+ of nanohydroxyapatite and bonding type I collagen. Chitosan-catechol's inherent antibacterial and antioxidant abilities endowed this scaffold with desirable abilities to eliminate periodontal pathogen infection and maintain homeostatic balances between free radical generation and elimination. Meanwhile, this scaffold promoted rat bone marrow stromal cells' osteogenic differentiation and achieved significant ectopic mineralization after 4 weeks of subcutaneous implantation in nude mice. Moreover, after 8 weeks of implantation in the rat critical-sized periodontal bone defect model, CSC-g-nHAp conferred 5.5-fold greater alveolar bone regeneration than the untreated group. This cationic biopolymeric scaffold could regulate the local microenvironment through the synergistic effects of its antibacterial, antioxidant, and osteoconductive activities to promote solid periodontal bone regeneration.

YAP/TAZ: Molecular pathway and disease therapy.

The Yes-associated protein and its transcriptional coactivator with PDZ-binding motif (YAP/TAZ) are two homologous transcriptional coactivators that lie at the center of a key regulatory network of Hippo, Wnt, GPCR, estrogen, mechanical, and metabolism signaling. YAP/TAZ influences the expressions of downstream genes and proteins as well as enzyme activity in metabolic cycles, cell proliferation, inflammatory factor expression, and the transdifferentiation of fibroblasts into myofibroblasts. YAP/TAZ can also be regulated through epigenetic regulation and posttranslational modifications. Consequently, the regulatory function of these mechanisms implicates YAP/TAZ in the pathogenesis of metabolism-related diseases, atherosclerosis, fibrosis, and the delicate equilibrium between cancer progression and organ regeneration. As such, there arises a pressing need for thorough investigation of YAP/TAZ in clinical settings. In this paper, we aim to elucidate the signaling pathways that regulate YAP/TAZ and explore the mechanisms of YAP/TAZ-induce diseases and their potential therapeutic interventions. Furthermore, we summarize the current clinical studies investigating treatments targeting YAP/TAZ. We also address the limitations of existing research on YAP/TAZ and propose future directions for research. In conclusion, this review aims to provide fresh insights into the signaling mediated by YAP/TAZ and identify potential therapeutic targets to present innovative solutions to overcome the challenges associated with YAP/TAZ.

Cascade and Ultrafast Artificial Antioxidases Alleviate Inflammation and Bone Resorption in Periodontitis.

Periodontitis, one of the most common, challenging, and rapidly expanding oral diseases, is an oxidative stress-related disease caused by excessive reactive oxygen species (ROS) production. Developing ROS-scavenging materials to regulate the periodontium microenvironments is essential for treating periodontitis. Here, we report on creating cobalt oxide-supported Ir (CoO-Ir) as a cascade and ultrafast artificial antioxidase to alleviate local tissue inflammation and bone resorption in periodontitis. It is demonstrated that the Ir nanoclusters are uniformly supported on the CoO lattice, and there is stable chemical coupling and strong charge transfer from Co to Ir sites. Benefiting from its structural advantages, CoO-Ir presents cascade and ultrafast superoxide dismutase-catalase-like catalytic activities. Notably, it displays distinctly increased Vmax (76.249 mg L-1 min-1) and turnover number (2.736 s-1) when eliminating H2O2, which surpasses most of the by-far-reported artificial enzymes. Consequently, the CoO-Ir not only provides efficient cellular protection from ROS attack but also promotes osteogenetic differentiation in vitro. Furthermore, CoO-Ir can efficiently combat periodontitis by inhibiting inflammation-induced tissue destruction and promoting osteogenic regeneration. We believe that this report will shed meaningful light on creating cascade and ultrafast artificial antioxidases and offer an effective strategy to combat tissue inflammation and osteogenic resorption in oxidative stress-related diseases.

Microenvironment Restruction of Emerging 2D Materials and their Roles in Therapeutic and Diagnostic Nano-Bio-Platforms.

Engineering advanced therapeutic and diagnostic nano-bio-platforms (NBPFs) have emerged as rapidly-developed pathways against a wide range of challenges in antitumor, antipathogen, tissue regeneration, bioimaging, and biosensing applications. Emerged 2D materials have attracted extensive scientific interest as fundamental building blocks or nanostructures among material scientists, chemists, biologists, and doctors due to their advantageous physicochemical and biological properties. This timely review provides a comprehensive summary of creating advanced NBPFs via emerging 2D materials (2D-NBPFs) with unique insights into the corresponding molecularly restructured microenvironments and biofunctionalities. First, it is focused on an up-to-date overview of the synthetic strategies for designing 2D-NBPFs with a cross-comparison of their advantages and disadvantages. After that, the recent key achievements are summarized in tuning the biofunctionalities of 2D-NBPFs via molecularly programmed microenvironments, including physiological stability, biocompatibility, bio-adhesiveness, specific binding to pathogens, broad-spectrum pathogen inhibitors, stimuli-responsive systems, and enzyme-mimetics. Moreover, the representative therapeutic and diagnostic applications of 2D-NBPFs are also discussed with detailed disclosure of their critical design principles and parameters. Finally, current challenges and future research directions are also discussed. Overall, this review will provide cutting-edge and multidisciplinary guidance for accelerating future developments and therapeutic/diagnostic applications of 2D-NBPFs.

Three-dimensional relationships between condylar volume and dentoskeletal characteristics in Class II hyperdivergent female adults.

BACKGROUND: This study aimed to determine the differences among various volumes of condylar osseous patterns and the corresponding dentoskeletal characteristics based on the risk of temporomandibular disorder. METHODS: Craniofacial spiral computed tomography data of 60 Class II hyperdivergent female adults were divided into normal, resorptive, flattened, and osteophyte groups based on condylar osseous forms. The condylar volumes of each group were compared, and their correlations with the dentoskeletal characteristics were assessed in three dimensions. Pairwise least significant difference tests were used to examine individual pairwise differences between groups, and one-way analysis of variance was used to measure differences among multiple groups. Pearson correlation and Spearman rank correlation analyses were used to determine the correlation between condylar volume and dentofacial characteristics. Statistical significance was established at p < 0.05. RESULTS: The condylar volume in the normal group was significantly greater than that in the changed groups, with no significant differences between the subgroups. The decrease in condylar volume was associated with a retruded and clockwise-rotated mandible with shorter rami. Condylar volume was negatively correlated with overjet, the alveolar height of the lower anterior and posterior teeth, sagittal inclinations of the lower teeth, intermolar width of the mandibular first molars, and width between the corresponding alveolar crests. CONCLUSION: Multiple three-dimensional dentoskeletal characteristics of Class II hyperdivergent female adults are correlated with condylar bony changes, regardless of the form. These results could be helpful in indicating potential pathological changes in the temporomandibular joint and in making proper treatment plans for these patients.

A coupled-lines system to determine the anteroposterior position of maxillary central incisors for smiling profile esthetics.

OBJECTIVES: To develop a coupled-lines system to determine the anteroposterior position of maxillary central incisors (U1) for smiling profile esthetics. MATERIALS AND METHODS: Thirty Asian females with ordinary and good facial harmony were selected as the study sample and the control sample, respectively. Three-dimensional facial images and 45°- and 90°-angled profiles were collected. The anteroposterior relationships between U1 and upper- and mid-facial soft tissue landmarks were measured. By morphing photos of the study sample, two artificial images were created to represent the well-balanced 45°- and 90°-angled profiles and were further processed with combined variations of soft tissue subnasale (SSn)-Glabella and the mid-point of facial axial points of the bilateral central incisor (mFA)-SSn distances. Esthetic assessments were performed on these images by layperson (n = 94) and orthodontist (n = 94) raters. RESULTS: Both upper- and mid-facial soft tissue landmarks were indispensable in assessing anteroposterior positions of U1 for well-balanced smiling profiles. As assessed in 45°- and 90°-angled profiles, the most esthetically sensitive parameters were mFA-Glabella and mFA-SSn distances. A coupled-lines system was constructed, comprising the Glabella and SSn vertical lines. In smiling profiles with optimal esthetics, the mFA point was at 2 to 5 mm posterior to the Glabella vertical and concomitantly 4 to 7 mm posterior to the SSn vertical, as perceived by orthodontists. Laypersons gave a wider range for mFA-Glabella distances, at 2 to 6 mm. CONCLUSIONS: The coupled-lines system could serve as a reliable reference for determining esthetically optimal anteroposterior positions of U1 for female facial profiles.

Comparison of bracket bonding between two CAD/CAM guided bonding devices: GBD-U vs GBD-B.

OBJECTIVE: To compare the bracket bonding accuracy, efficiency, reproducibility, and three-dimensional (3D) printing duration of the computer-aided design/computer-aided manufacturing (CAD/CAM) unilateral contact guided bonding device (GBD-U) and the bilateral contact guided bonding device (GBD-B) in vitro. METHODS: Five resin dental model sets were scanned and virtually bonded with brackets. GBD-U and GBD-B were designed and 3D printed for each model. GBD-Us had guide blocks that fit the occlusal sides of the bracket tie-wings, while GBD-Bs had guide arms that fit the occlusal and distal sides of the tie-wings. Five orthodontic residents were recruited to bond brackets on the same 3D-printed copies of resin models in a dental mannequin using GBD-Us and GBD-Bs, respectively. The time for 3D printing of GBDs and bracket bonding was recorded. The linear and angular deviations between the bonded brackets and the virtually bonded ones were measured. RESULTS: A total of 50 sets of resin models (1000 brackets/tubes) were bonded. The time for 3D printing and bracket bonding was shorter for GBD-Us (41.96 mins/6.38 mins) than for GBD-Bs (78.04 mins/7.20 mins). In both devices, 100% linear deviations and over 95% angular deviations were below 0.5 mm or 2°, respectively. Deviations in the mesiodistal dimension, torque, angulation, and rotation were significantly lower in the GBD-U group (P<0.01). High inter-operator reproducibility of bracket bonding was confirmed for both devices. CONCLUSION: GBD-U was more time-efficient in 3D printing. Both GBDs showed clinically acceptable accuracy, whereas GBD-U had higher bonding accuracy in the mesiodistal dimension, torque, angulation, and rotation than GBD-B. CLINICAL SIGNIFICANCE: CAD/CAM GBD-U provides high bracket bonding accuracy in a time-efficient manner and has the potential to be clinically applied.

Periodontal ligament-associated protein-1 engages in teeth overeruption and periodontal fiber disorder following occlusal hypofunction.

BACKGROUND AND OBJECTIVE: Teeth overeruption is a problem of clinical significance, but the underlying mechanism how changes in external occlusal force convert to the periodontium remodeling signals has been a largely under explored domain. And recently, periodontal ligament-associated protein-1 (PLAP-1)/asporin was found to play a pivotal role in maintaining periodontal homeostasis. The aim of this study was to explore the function of PLAP-1 in the periodontally hypofunctional tissue turnover. METHODS: After extracting left maxillary molars in mice, the left and right mandibular molars were distributed into hypofunction group (HG) and control group (CG), respectively. Mice were sacrificed for radiographic, histological, and molecular biological analyses after 1, 4 and 12 weeks. In vitro, dynamic compression was applied using Flexcell FX-5000 Compression System to simulate intermittent occlusal force. The expression of PLAP1 in loaded and unloaded human periodontal ligament cells (hPDLCs) was compared, and its molecular biological effects were further explored by small interfering RNA (siRNA) targeting PLAP1. RESULTS: In vivo, fiber disorder in periodontal ligament (PDL), bone apposition at furcation regions, and bone resorption in alveolar bone were illustrated in the HG compared with the CG. In addition, PLAP-1 positive area decreased significantly in PDL following occlusal unloading. In vitro, the loss of compressive loading relatively downregulated PLAP1 expression, which was essential to promote collagen I but inhibit osterix and osteocalcin expression in hPDLCs. CONCLUSIONS: PLAP-1 presumably plays a pivotal role in occlusal force-regulated periodontal homeostasis by facilitating collagen fiber synthesis in hPDLCs and suppressing excessive osteoblast differentiation, further preventing teeth from overeruption. Further evidence in PLAP-1 conditional knockout mice is needed.

Three-dimensional quantitative analysis of dental and skeletal characteristics of skeletal Class I unilateral posterior crossbite in adults.

BACKGROUND: To study the dentoskeletal characteristics and the degree of compensations in skeletal Class I adults with unilateral posterior crossbite (UPCB). METHODS: A sample of 40 adults was chosen for this cross-sectional study. 20 skeletal Class I adults with UPCB (mean age: 22.20 ± 2.88 years), were compared to 20 skeletal Class I adults with normal occlusion (mean age: 27.56 ± 5.76 years). The respective dentoskeletal measurements were made on cross-sectional images from cone-beam computed tomography scans. RESULTS: Skeletally, both groups showed significant differences (P < 0.05) in mandibular corpus length and menton deviation with the UPCB group showing the greatest displacement. Maxillomandibular vertical asymmetry and condylar positional asymmetry were not significant in both groups (P > 0.05). For dental variables on the second premolar and first molar, the UPCB group showed greater linear and angular differences when compared to the control group (P < 0.05). On the crossbite side, maxillary posterior teeth were more buccally inclined, and mandibular posterior teeth were more lingually inclined. However, on the non-crossbite side, both maxillary and mandibular posterior teeth were lingually inclined. CONCLUSION: Adults with UPCB showed distinct transverse dentoskeletal asymmetry. No asymmetry was found in the condylar position and the mandibular height in UPCB adults.

External apical root resorption in orthodontic tooth movement: the risk factors and clinical suggestions from experts' consensus.

External apical root resorption is among the most common risks of orthodontic treatment, and it cannot be completely avoided and predicted. Risk factors causing orthodontic root resorption can generally be divided into patient- and treatment-related factors. Root resorption that occurs during orthodontic treatment is usually detected by radiographical examination. Mild or moderate root absorption usually does no obvious harm, but close attention is required. When severe root resorption occurs, it is generally recommended to suspend the treatment for 3 months for the cementum to be restored. To unify the risk factors of orthodontic root resorption and its clinical suggestions, we summarized the theoretical knowledge and clinical experience of more than 20 authoritative experts in orthodontics and related fields in China. After discussion and summarization, this consensus was made to provide reference for orthodontic clinical practice.

Association of Diet-Related Systemic Inflammation with Periodontitis and Tooth Loss: The Interaction Effect of Diabetes.

Diet is an important factor that can affect inflammatory processes. Diet-related systemic inflammation is closely linked to periodontitis and tooth loss. However, the role that systemic conditions play in influencing this association remains unclear. A cross-sectional analysis was conducted using the National Health and Nutrition Examination Survey (NHANES) from 2009 to 2014. Diet-related systemic inflammation was assessed by the Dietary Inflammatory Index (DII). Multivariate Cox regression models were used to investigate the association between DII and periodontal results, including total periodontitis, tooth loss, severe tooth loss, and the number of teeth lost. The interaction effects between DII and established covariates were tested. Higher DII scores, corresponding to a higher pro-inflammatory potential of the diet, were associated with an increased risk of periodontitis and tooth loss among the 10,096 eligible participants. There was an interaction between diabetes and DII on total periodontitis (p = 0.0136). No significant interaction effect was detected between DII and other established covariates. Participants who consumed an anti-inflammatory diet, and did not have diabetes, experienced the lowest risks of periodontitis and tooth loss. However, in the context of diabetes, the efficacy of such a diet may be weakened or even eliminated. Dietary interventions to manage oral health problems may need to take the individual's metabolic condition into account.

Catalase-Mimetic Artificial Biocatalysts with Ru Catalytic Centers for ROS Elimination and Stem-Cell Protection.

Exploring high-efficiency reactive oxygen species (ROS)-elimination materials is of great importance for combating oxidative stress in diverse diseases, especially stem-cell-based biotherapeutics. By mimicking the FeN active centers of natural catalase, here, an innovative concept to design ROS-elimination artificial biocatalysts with Ru catalytic centers for stem-cell protection is reported. The experimental studies and theoretical calculations have systematically disclosed the activity merits and structure diversities of different Ru sites when serving as ROS-elimination artificial biocatalysts. Benefiting from the metallic electronic structures and synergetic effects of multiple sites, the artificial biocatalysts with Ru cluster centers present exceptional ROS-elimination activity; notably, it shows much higher catalytic efficiency per Ru atom on decomposing H2 O2 when compared to the isolated single-atom Ru sites, which is more efficient than that of the natural antioxidants and recently reported state-of-the-art ROS-scavenging biocatalysts. The systematic stem-cell protection studies reveal that the catalase-like artificial biocatalysts can provide efficient rescue ability for survival, adhesion, and differentiation functions of human mesenchymal stem cells in high ROS level conditions. It is suggested that applying these artificial biocatalysts with Ru cluster centers will offer a new pathway for engineering high-performance ROS-scavenging materials in stem-cell-based therapeutics and many other ROS-related diseases.